Setting Up Stage Blocks

• First, we took the block tops and laid them on the floor with the underside facing upwards.
• We loosened the clamp bolts to allow enough room for the legs to slot into place

• We then slid the legs (250mm) into the clamps and tightened the bolts to keep them steady.

• To secure them further, we took an 8mm Alan key and tightened each bolt with a half turn at a time to ensure each bolt was equal.
• When all the legs were steadily in place, we took both ends of the stage blocks and flipped it over so that it was upright.

• We repeated the process with another stage block which had longer legs (500mm).
• When both blocks were complete, we set them up as shown.
• Finally, we took the blocks down in the reverse order they had been set up.
  
  Each stage block top is 2x1m
  There are four heights:
  1000mm (stage height)
  750mm
  500mm
  250mm